墙纸贴法（Wallpaper paste method）.docVIP

墙纸贴法（Wallpaper paste method） Add some auxiliary words means of preparation Bucket, ruler, pencil, tape, scissors, knife, cloth, sponge, ladders, roller, scraper, glue worktable, stirring rod, pressure wheel, soft brush Wall treatment A principle, to achieve smooth, dry, uniform color can stick wallpaper. Two, cement, brick wall itself is relatively flat with putty, brush on a thin varnish can stick wallpaper. 1. gypsum board, plywood and blockboard: seams exist so first fill seam flat again. 1), patching putty to add more glue (vinyl acetate resin), the joint firm, wont crack. 2), batch of flat with putty: as long as the addition of a small amount of glue, so that sand mill. 2. gypsum powder and glue to replace the batch of flat with putty, can accelerate the drying, shorten the construction time. 3.: the wall wall is not the existence of solid powder should be removed sanding, leveling, brush on the membrane can wallpaper. 4. light wall: namely metope very smooth (e.g. the metope), not easy to absorb glue, easy to dry, then power will decline, so only after posting wallpaper scrub. 5.: the wall paint is very suitable for change wallpaper, but do sanding treatment after besmear brushs wallpaper to film the construction. Three, brush the wall of the basement membrane, such as easy to wet, moldy walls may be appropriate to brush again, to be completely dry after the varnish, you can post the wallpaper Four, the basement membrane function: the film aims to cure and protect the putty surface, also can strengthen the wall surface waterproof, mouldproof function, but to completely dry before brushing putty (film is environmental protection product, easy to do, is the traditional varnish substitute). Wallpaper glue The glue amount of reference: Paper wallpaper: special wallpaper powder package (160 grams) A special glue tank (400 grams) The rubber surface (paper): special wallpaper wallpaper powder package (160 grams) A special white glue tank (400 grams) Thick rubber surf