玻璃种类（The type of glass）.docVIP

玻璃种类（The type of glass） Let you distinguish between types of glass, principle and terminology (refinement!!) What is the glass? The forming process of float glass production is in the inlet of protective gas (N2 and H2) completed in tin bath. The molten glass from the pool kiln in the continuous inflow of floating on the surface of liquid tin and relative density on the gravity and surface tension, the glass liquid level in the swing, tin flat, smooth surface, hardening and cooling was cited on the transition table. Rotating the roller roller table, the glass with stannic chamfer enters annealing kiln, annealing, cutting, get flat glass products. Float and other molding methods, its advantages are: suitable for efficient manufacturing quality of flat glass, such as no wave, uniform thickness, smooth surface, upper and lower are parallel to each other; the scale of the production line is not affected by the forming method, energy consumption per unit of product is low; the finished high utilization rate; easy to scientific management and implementation the mechanization, automation, high labor productivity; continuous operation cycle of up to several years, is conducive to stable production; to provide suitable conditions for the on-line production of some new varieties, such as electric float reflective glass, annealing, cold end spraying film glass surface treatment etc.. Look how to identify the quality of float glass? Float glass flat glass production is advanced by the float process, the purchase of float glass should pay attention to the following aspects: 1. color: quality should be colorless transparent or light green. The 2. surface of the glass is not allowed to wipe off the attachment. 3. thickness should be uniform. A piece of glass with the thickness deviation should be less than 0.2-0.3 mm. 4. should not crack, edge should not have obvious lack of residual. Through the observation of light, tin, pits, inclusions, line and wear is not allowed. In the sem