电流的选择（Current selection）.docVIP

电流的选择（Current selection） Selection of wire diameter The current carrying capacity of the wire is related to the cross section of the conductor, but also to the material, type, laying method and environmental temperature of the conductor. There are many factors affecting the calculation and the calculation is more complicated. The ampacity of various wires can usually be found in the manual. But the use of formulas with some simple arithmetic, can be calculated directly, without look-up table. 1. formulas of aluminum core insulation wire section carrying capacity and multiple relationship 10, five, 100, two, 25, 35, four, three,. 70, 95, two and a half times. Tube, temperature, eight or nine fold. Add half bare. Copper upgrade. 2. formulas for various section carrying capacity (ANN) is not directly pointed out, but with the section multiplied by a certain multiple representation. For this reason, the nominal sections (mm2) of our usual wires are arranged as follows: 1, 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70,, 95, 120, 150, and 185...... (1) pointed out that the first sentence rhymes aluminum core insulated wire carrying capacity (ANN), according to the times of calculation section. The formulas in Arabia digital said the conductor section (mm2), Chinese characters digital times. The formulas of section and multiple relationships arranged as follows: 1~1016, 2535, 5070, 95120 or more . Five times four times three times two times two times Now more and more clearly the control formula, formula 10 under five refers to the section below 10, carrying capacity is five times the value of cross section. 100 on two (read hundreds of two) refers to the cross section of more than 100 of the carrying capacity is two times the value of the cross-section. A cross section of 25 and 35 is four times and three times the dividing line. This is the formula 25, 35, four realms . And the cross section 70 and 95 is two point five times. From the above arrangement, it can be seen that in a