电缆桥架选用介绍（Selection of cable tray）.doc

电缆桥架选用介绍（Selection of cable tray） Ladder type bridge can be a bridge of all kinds of cables The strong and weak cables must be separated Specific explanation is that: 1. step and tray cable tray GJD (T, P) ladder and tray cable bridge can be widely used in oil, chemical, power, light industry, television, telecommunications, coal and other aspects of laying cables. They are attractive in appearance, simple in structure, easy to install (good heat dissipation and breathability). The ladder type cable tray is suitable for the requirements of power cables, as well as for the laying of control cables, and also for the laying of power cables and control cables on the same layer of cable bridges after the use of partitions. Cascade, cable tray tray surface treatment is divided into galvanized, electrostatic spraying, hot galvanized and galvanized after spraying four, can be used for different environment, as a special anti-corrosion treatment in heavy corrosive environment should be. 2. trough type cable tray The slot type cable tray is a fully enclosed cable tray, which is suitable for laying computer cables, communication cables, thermocouple cables and other sensitive system control cables. It has good effect on shielding interference of control cable and cable protection in heavy corrosive environment. Trough cable tray and its surface treatment is divided into galvanized, electrostatic spraying, hot galvanized and galvanized after spraying four, can be used for different environment, as a special anti-corrosion treatment in heavy corrosive environment should be. 3. assembled cable tray The assembled cable tray is a new type of bridge, and it is an updated product in the cable tray series. The utility model has the advantages of simple structure, flexible configuration, convenient installation, novel form, etc. the utility model is suitable for the laying of various projects, various units and various cables. Assembly type cable tray, as long as the use of three basic