大跨度预应力次梁楼盖边梁协调扭转模拟分析教材.pdfVIP

第32 卷第1期 重 庆 大学 学 报 Vol.32 No. 1 2009 年1 月 Journal of Chongqing University Jan. 2009 : 1000-582 (2009) 01-0055-06 黄 音, 贺振坤, 白绍良, 王正霖 (重庆大学 土木工程学院,重庆400030) : 多方案模拟4 大跨度预应力次梁楼盖试件的边梁协调扭转试验,分析比较各方案的 开裂荷载极限荷载以及边梁的协调扭矩单位长度扭转角边梁扭转刚度等结果, 得出的主要结论 有:在整 受力过程中,边梁协调扭矩总体呈增长趋势, 并不因边梁开裂而明显下降; 美国ACI318- 05 规范的开裂扭矩值偏小, 与边梁极限扭矩相差较大; 对于开裂后的大跨度预应力次梁楼盖边梁扭 转刚度折减系数,无整浇板时可取0. 05~ 0. 10,带整浇板时可取0. 10~ 0. 40 :边梁; 协调扭转; 大跨度预应力次梁楼盖 :T U375. 1 :A Simulation of compatibility torsion experiments of a spandrel beam in a long- span prestressed concrete secondary beams floor system HUANG Yin, HE Zhen-kun, BAI Shao-liang , WANG Zheng-lin (College of Civil Engineering, Chongqing University, Chongqing 400030, P. R. China) Abstract: Multiform simulations of 4 specimensp compatibility torsion experiments of a spandrel beam in a long-span prestressed concredt ( P. C.) secondary beams floor system are introduced. The results of different simulation methods, such as crack loading, ultimate loading, the torque, twist and torsional stiffness of spandrel beams, are compared and analyzed. The main conclusions are as follows: T he compatibility torque of a spandrel beam continuously increases with the load in all the process; T he torque does not decrease obviously after cracking; The cracking torque value given by the American Concrete Institute ( ACI) Code 318-05 is much smaller than the ultimate torque; The reduction parameter of the torsion stiffness in a spandrel beam after cracking equals 0. 05~ 0. 10 for along-span P.C. secondary beams floor system without monolithic slabs, and 0. 10~ 0.40 with monolithic slabs. Key words: spandrel beam; compatibility torsion; long-span prestressed concrete secondary beams floor system 0, 4