- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
AS 1580.0—2004
A
S
1
5
8
0
.
0
—
2
0
0
4
Australian Standard™
Paints and related materials—Methods
of test
Part 0: Introduction and list of methods
This Australian Standard was prepared by Committee CH-003, Paints and Related
Materials. It was approved on behalf of the Council of Standards Australia on
25 June 2004.
This Standard was published on 26 November 2004.
The following are represented on Committee CH-003:
AUSTROADS
Australian Paint Approval Scheme
Australian Paint Manufacturers Federation
Master Painters Australia
National Association of Testing Authorities Australia
Surface Coatings Association Australia
Telstra Corporation
Water Corporation Western Australia
Keeping Standards up-to-date
Standards are living documents which reflect progress in science, technology and
systems. To maintain their currency, all Standards are periodically reviewed, and
new editions are published. Between editions, amendments may be issued.
Standards may also be withdrawn. It is important that readers assure themselves
they are using a current Standard, which should include any amendments which
may have been published since the Standard was purchased.
Detailed information about Standards can be found by visiting the Standards Web
Shop at .au and looking up the relevant Standard in the on-line
catalogue.
Alternatively, the printed Catalogue provides information current at 1 January each
year, an
文档评论(0)