ansys单元的特性（The characteristics of ANSYS unit）.docVIP

下载本文档

6
0
约2.2万字
约 15页
2017-08-17 发布于河南
举报
版权申诉

ansys单元的特性（The characteristics of ANSYS unit）.doc

1、本文档共15页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
5、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
6、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
7、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
8、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

ansys单元的特性（The characteristics of ANSYS unit）

ansys单元的特性（The characteristics of ANSYS unit） Read, use, limit, and explain carefully. Mass21 is the linear displacement of the three directions of the elements of 6 degrees of freedom, x, y, Z, and the rotational displacement around the X, y, and Z axes. The mass and moment of inertia of each degree of freedom are defined respectively. Link1 can be used in a variety of Engineering applications. Depending on the application, you can see the elements as trusses, connecting rods, springs, etc.. The 2 dimensional bar element is a uniaxial tension and compression element with two degrees of freedom at each node. X, y, directions. Hinged, without bending moment. Link8 can be used in different projects in the rod. It can be used as analogue frame, sag cable, connecting rod, spring and so on. The 3 dimensional bar element is a uniaxial tension and compression element. Each point has 3 degrees of freedom. X, y, Z directions. As an articulated structure, there is no bending moment. It has the characteristics of plasticity, creep, expansion, stress strengthening and large deformation. Link10 3 dimensional bar element has the characteristics of bilinear stiffness matrix, uniaxial uniaxial tension (or pressure) elements. For unidirectional shafts, the hardness disappears if the element becomes pressed. This property can be used in a static cable, when the entire cable is modeled as an element. When static elements are needed, but static elements are not the initial input, they can also be used in dynamic analysis. The element is the line form of shell41, keyopt (1) =2, cloth option. If the purpose of the analysis is to study the motion of elements (without statically determinate elements), elements such as link8 and pipe59, which are similar but not loose, can be used instead. When the final structure is a taut structure, the Link10 can not be used for static concentration analysis. But the conditions are also possible because the final result is relaxed at one point. In this c