cfg长螺旋钻机结构图（CFG long spiral drill structure）.doc

cfg长螺旋钻机结构图（CFG long spiral drill structure） Structure diagram of CFG long auger rig Cfg30 long hole auger is composed of two parts, hydraulic walking pile and drilling system. The pile foundation is mainly composed of column, bracing, lifting device, chassis, walking mechanism, slewing mechanism, winding mechanism, control room, hydraulic system and electrical system. The drilling system mainly consists of power head, drilling tool, fixed support and so on. (see Figure 1) 1. The column is made of 820 mm steel tube and added to the blue disc. The upper part has a top pulley. Through it, winch can realize the power head, reinforcing cage and other auxiliary lifting and falling action. The front of the column is equipped with a rail gauge 600, which is the guiding and supporting device of the drilling system. 2, diagonal bracing up and down, respectively, and column and platform hinge, the lower part of the hidden - cylinder, used to help lift and adjust the verticality of the column. 3, the walking mechanism adopts hydraulic walking mechanism, walking through the cylinder to achieve 2m step every step. Pile machine needs to shift, control valve, so that the four leg cylinder out of ground and pile top, the ship track off the ground, and then operating the reversing valve cylinder joint walking, walking cylinder that drives ship track. Then, the leg oil cylinder is retracted, the track of the ship type is grounded, the reversing valve is operated, the running cylinder is connected, and the oil cylinder drives the pile machine to roll forward on the ship shaped track. The walking mechanism and the rotary mechanism are used together, so that the drill can move around, left and right. The slewing mechanism 4, slewing mechanism of the pile machine is composed of a driving mechanism and the slewing bearing, driven by - piston motor, a planetary reducer, small gear drive slewing gear to realize the 360 degree rotary pile machine, driven by a hydraulic motor, rotary stable w