pt燃油泵（PT fuel pump）.docVIP

pt燃油泵（PT fuel pump） The PT (Pressure-Time) fuel supply system produced by Cummins, Komatsu and Cummins PT fuel pump is low pressure fuel pump, which provides the fuel supply pressure to the injector is 2Mpa maximum. The basic function of the PT fuel pump is to transport fuel from the tank to the engine; to provide fuel flow and pressure for the PT injector; to control and regulate the speed, load and working conditions of the engine. In the PT fuel pump, the PT (G) type fuel pump is the most basic fuel pump, the most representative structure. In PT (G) type fuel pump on the basis, according to the need of supporting models, Cummins engine company developed PT (G) -AFC, PT (G) -EFC, PT (G) -VS and PT (G) -VS-AFC and other types of fuel pump. PT (G) fuel pump mainly consists of gear pump, shock absorber, throttle shaft, governor, stop valve and so on. In order to meet the requirements of the turbocharged engine, the oil pressure of the fuel pump with the engine supercharging pressure varies, avoid engine low smoke too much, Cummins Engine Company PT (G) type fuel pump based on the development of PT (G) -AFC type fuel pump. PT (G) -EFC fuel pump is based on the PT (G) type fuel pump, adding EFC electronic fuel control valve, which is mainly used in various generator sets. When the load changes and the working speed of a wide range of power equipment, such as large trucks, tractors, construction machinery etc., often requires a fuel pump governor control role in the engine operating speed, which requires the fuel pump with variable speed governor. In the basic PT (G) fuel pump, the VS governor (mechanical centrifugal action governor) has been added to the PT (G) -VS fuel pump, which is a fuel pump adapted to this requirement. In order to control the discharge and smoke of the engine operating conditions change, the AFC device can also be added on the basis of PT (G) -VS fuel pump to form a PT (G) -VS-AFC fuel pump. Should be very clear, I hope to help you. Cummins PT pu