人工地震波生成程序简介（Artificial seismic wave generation program introduction）.doc

人工地震波生成程序简介（Artificial seismic wave generation program introduction） Name: Guo Yong Student ID: 0220020128 Introduction of artificial seismic wave generation program Content and method of program design 1, procedural content The program generates artificial seismic waves based on the initial conditions of the characteristic cycle, the maximum coefficient of the horizontal seismic wave and the amplitude of seismic wave, and provides the source of seismic waves for the time history analysis of structural dynamic analysis. 2, program design method (1) theoretical basis This program uses the trigonometric series method to generate artificial seismic waves. For the given power spectral density function, the Gauss stationary process with the power spectral density function and the mean zero can be easily generated by the following formula. (1) In style: (2) The random phase angles for the uniform distribution are the upper and lower bounds in the positive domain, i.e., the effective power is considered within the range, while the values outside the range can be considered as zero. In order to reflect the nonstationarity of ground motion, the envelope function is multiplied by the stationary process, (3) (3) that is artificial seismic wave model. It can be determined according to the following formula: (4) Formula: for attenuation coefficient, usually range of 0.1~1.0, this procedure take 0.15; and according to different actual situation value, for seismic wave hold time, this procedure take, respectively 4S, 15s, and are 40s. In this procedure, the response spectrum in the code for seismic design of buildings (GB50011-2001) is used as the target spectrum, and the approximate relation between the response spectrum and the power spectrum is proposed by the stationary process proposed by Kaul (5) Formula: in order to regulate the response spectrum, for the damping ratio; for the earthquake hold time; for the probability that the reaction does not exceed the value of the resp