人工挖孔桩（Artificial digging pile）.docVIP

人工挖孔桩（Artificial digging pile） Standard Specification for Manually Excavated Pile I. acceptance data of foundation piles and pile caps 1. when the design elevation of pile top elevation and the construction site is close, acceptance of pile foundation engineering pile should be completed after acceptance, when the design elevation of pile top elevation is lower than the construction site, to be excavated to the design elevation for acceptance. 2. the pile foundation acceptance shall include the following information: 1) notification report, pile foundation construction drawings, drawings, summary of the design change and substitute materials in engineering geological exploration. 2) the approved construction organization design, construction plan and changes in the implementation. 3) pile location survey drawing, including the pile position line review, the visa form. 4) quality inspection report of pile forming. (small strain) 5) test report of bearing capacity of single pile. (static loading test, core pulling, etc.) 6) the foundation pit excavation to the design elevation of the completion of the pile foundation plan and pile top elevation map. 3. the acceptance of the pile cap project shall include the following information: 1) construction and inspection record of steel bar and concrete; 2) the distance between the pile head and the anchor bar of the pile cap, the distance of the side pile from the edge of the cap, and the reinforcement protection layer of the cap; 3) cap thickness, length and width records and appearance description, etc.. Two. Quality inspection of pile forming Check the quality of 1. pile pile quality inspection mainly includes Jiqing hole hole, fabrication and installation of reinforcement cage, concrete mixing and pouring process three. 1) concrete mixing shall be carried out for the quality and measurement of raw materials, concrete mix ratio, slump and concrete strength grade; 2) steel cage production shall be checked for the specificati