机器的保养（Machine maintenance）.docVIP

机器的保养（Machine maintenance） 1, the ambient temperature to maintain at room temperature (about 22 degrees Celsius), there is a certain humidity, dust as small as possible. 2, regular maintenance of the machine, reducing dust, ink and other effects on the machine, The car sliding axis: daily cleaning, use a clean cloth or paper towel with alcohol, prohibit the use of any clock oil (etwee the ink cartridge cleaning) weekly cleaning, remove the wash water, wipe the ink film and do not lose the right place Grating bars are cleaned every week, daily observation, swab + distilled water or alcohol wipe up and down, do not take too much effort The car and head of ink contact piece of daily check, ensure no ink dirt, prevent the excessive alcohol dissolution of micro power Wipe the cartridge (head of Qing etwee) weekly cleaning, remove the wash water, wipe the ink film and do not lose the right place. 3, note that you cannot use oily ink, oily corrosive ink supply system and ink jet jamming. Original ink is your best choice. Can not use mixed ink. 4, can not live plug-in line, otherwise it will cause damage to the main wrench. 5, do not rub the nozzle head, ink can be used without hair cloth or good quality paper towels to wipe off the sticky suction can, otherwise it may cause ink hole plug. 6, the machine must be connected to ground; when the air is dry electrostatic problems can not be ignored, when using certain gum and light medium, with electrostatic charge (especially quickly in the paper work speed); the electrostatic charge can cause the machine head and safety grounding wire will take damage, static electricity release power in power operation head, hands to ensure discharge (contact grounding conductors or wear anti-static bracelet, otherwise easy to cause damage to individual ink ink. Grounding requirements and methods: The grounding wire should adopt mechanical strong single strand copper wire or coil winding. The ground can not be shared with the building of ligh