数控加工典型问答（Ask the typical NC machining）.docVIP

数控加工典型问答（Ask the typical NC machining） Typical questions and answers of NC machining Because of the complexity of NC machining (such as different machines, different materials, different cutting tools, cutting method, different parameter setting and so on), decided from engaged in the numerical control processing (either processing or programming) to reach a certain level, must go through a period longer than the time, this is the laboratory manual some engineers in the experience summed up long-term confluence in actual production process, the NC machining process, process, tool parameters selection, process monitoring and other aspects, for your reference. Q: how do you segment the machining process? Answer: the division of NC machining process can be carried out in the following ways: (1) the method of centralized cutting of cutting tools is to divide the working steps according to the tools used, and finish all the parts that can be finished with the same cutting tool. In the third, they can complete the dabbler in other parts of the. This reduces the number of turns, compresses the idle time, and reduces unnecessary positioning errors. (2) the machining part is divided into several parts according to its structural features, such as inner shape, shape, surface or plane. Generally, the flat surface, the locating surface and the finishing hole are processed first. The simple geometric shapes are processed first, and then the complex geometry shapes are processed. The parts with lower machining accuracy and the higher machining precision are firstly processed. (3) with coarse and fine processing method for order prone to deformation of parts, and the need for correction due to deformation may occur after the rough machining, so generally if we want to make a rough and finishing process will be separated. To sum up, in the division process, we must take the parts of the structure and technology, the function of the machine tools, parts, CNC machining content, the n