水利水电工程施工总承包新资质（New qualifications for general contracting of water conservancy and hydropower projects）.docVIP

水利水电工程施工总承包新资质（New qualifications for general contracting of water conservancy and hydropower projects） The general contracting qualification of water conservancy and hydropower projects is divided into special grade, grade one, grade two and grade three. 5.1 grade a qualification standard 5.1.1 enterprise assets Net assets of more than 100 million yuan. 5.1.2 enterprise key personnel (1) there are no less than 15 registered constructors for water conservancy and Hydropower engineering. (2) technical responsible person has more than 10 years in construction technology management experience, and has a senior professional title related to water conservancy and Hydropower Engineering; water conservancy and Hydropower Engineering related intermediate above title personnel not less than 60 people. (3) there are not less than 50 managers at the construction site who have post certificates, and the constructors, quality clerks, safety personnel, material clerks and data clerks are complete. (4) no fewer than 70 skilled workers have been examined or trained to be qualified intermediate workers or above. 5.1.3 enterprise engineering performance In the past 10 years, we have undertaken the general contracting or main project contracting of the 3 types of projects in the following 7 categories, including 1~2 types, at least 1 kinds, 3~5 kinds, and at least 1 types, and the quality of the project has been qualified. (1) storage capacity of 50 million cubic meters or more, 15 meters above the dam or storage capacity of more than 10 million cubic meters, and more than 50 meters above the dam reservoir, hydropower station dam 2; (2) flow rate is greater than or equal to 500 cubic meters / second gate 4 (not including rubber dam etc.); (3) the total installed capacity is over 100MW, and the hydropower stations are 2; (4) the total installed capacity of 5MW (or flow more than 25 cubic meters / sec) more than 2 pumping stations; (5) the hole diameter is not less than 6 meters (or bas