法兰结构密封面形式（Sealing surface form of flange structure）.docVIP

法兰结构密封面形式（Sealing surface form of flange structure） Flange structure type: According to the structure and connection flange and pipe flange, divided into: whole hubbed threaded flange, welded flange, hubbed flange, hubbed socket welding flange, loose flanges (containing 4 different loose components) and the flange (called blind flange). The integral flange refers to the pump, valve, machine and other mechanical equipment, the export of the flange, used specifically for the pipe flange connection. These inlet and outlet flanges are usually made of mechanical equipment as part of the equipment. Flanges are usually cast in conjunction with the equipment, and a few are forged, such as the end flanges on forged steel valves. The threaded flange is to process the inner hole of the flange into the pipe thread and realize the connection with the threaded pipe. It is a non welding flange. Compared with the welded flange, threaded flange has the characteristics of installation and maintenance, and can be used on some welding lines which are not allowed on site. Alloy steel flanges have sufficient strength, but they are difficult to weld or have poor weldability, and they can also be threaded flanges. But in the pipeline, the temperature changes sharply or the temperature is higher than 260 degrees C Below -45 degrees C, it is recommended not to use threaded flanges so as to avoid leakage. Also known as the high neck flange welding flange, it is different from the other flange is to have a high neck flange long inclined from the flange and pipe welding, the high neck thickness along the height direction of a gradual transition to the pipe wall thickness, the continuity of stress, thus increasing the strength of flange. The butt welding flange is mainly used in the condition of more demanding occasions. Such as: Piping thermal expansion or other load and make the flange stress or stress changes repeatedly, pressure, temperature fluctuations of large pipes or high temperature, h