MSP430f149 AD源程序.docVIP

#include MSP430x14x.h #define ADCMEM ((int *) 0x0140) //ADC12MEMx定义 void InitSYS(void); void InitUST0(void); //初始化系统及ADC寄存器 void InitUST1(void); void InitADC(void); void SetZero(void); int GetBusData(void); void SetBusData(int busvdata); void SendRomCode(void); void Averege(void); void Filter(void); void Analysis(void); void Delay(int delaydata); interrupt[ADC_VECTOR] void ADC12(void); interrupt[USART1RX_VECTOR] void USART1(void); unsigned char savedata[1500]; unsigned char saveromdata[7]; unsigned char enddata[3]; unsigned int adtime; unsigned int recromok; unsigned int ave; unsigned int datai; unsigned int vdata; unsigned int time; void main(void) //使用中断方式 { unsigned int i,busvdata,low,hi,ldata; InitSYS(); InitUST0(); InitUST1(); InitADC(); P1DIR |= 0x20; P1DIR |= 0x1c; //p1.4 p1.3 p1.2 P1OUT |= BIT4; SetZero(); //设置x9015到零 for(i=0;i30000;i++) { _NOP(); } //wait to sample busvdata=GetBusData(); // while(1) { SetBusData(busvdata); busvdata=GetBusData(); if(busvdata150) { break; } } IE2 |=URXIE1; while(1) { // for(time=0;time256;time++) // { //IE2 |=URXIE1; //low=time; recromok=0; while(recromok!=1); SendRomCode(); for(i=0;i6500;i++) { _NOP(); } //wait to sample ADC12CTL0 |= 0x02; ADC12CTL0 |= 0x01; //start AD adtime=0; while(1) { if(adtime1500) { ADC12CTL0 = ~0x02; Filter(); Averege(); Analysis(); for(i=0;i3;i++) { U1TXBUF = enddata[i]; while((U1TCTL0x01)==0); } /* if(enddata[0]==0x11) { for(i=0;i1500;i++)