退火处理提高P3HTPCBM聚合物太阳能电池光伏性能.PDF

See discussions, stats, and author profiles for this publication at: /publication Photovoltaic Performance Improvement of P3HT:PCBM Polymer Solar Cells by Annealing Treatment Article in ACTA PHYSICO-CHIMICA SINICA · April 2011 DOI: 10.3866/PKU.WHXB20110 1 CITATIONS READS 20 0 6 authors, including: Fujun Zhang Jian Wang Beijing Jiaotong University Taishan University, Taian, China 239 PUBLICATIONS 2,34 CITATIONS 62 PUBLICATIONS 793 CITATIONS SEE PROFILE SEE PROFILE Some of the authors of this publication are also working on these related projects: organic solar cells View project optoelectronic materials and devices View project All content following this page was uploaded by Fujun Zhang on 27 June 2015. The user has requested enhancement of the downloaded file. 物理化学学报(Wuli Huaxue Xuebao) April Acta Phys. -Chim. Sin. 2011, 27 (4), 875-880 875 [Article] 退火处理提高P3HT:PCBM 聚合物太阳能电池光伏性能 卓祖亮 张福俊* 许晓伟 王 健 卢丽芳 徐 征 (北京交通大学发光与光信息教育部重点实验室, 北京100044) 摘要: 利用旋转涂膜方法制备了以P3HT:PCBM 为有源层的聚合物太阳能电池, 器件结构为ITO/PEDOT: PSS/P3HT:PCBM/Al(氧化铟锡导电玻璃/聚二氧乙基噻吩:聚对苯乙烯磺酸/聚三已基噻酚:富勒烯衍生物/铝), 研究了退火温度对聚合物太阳能电池性能的影响. 实验发现: 聚合物薄膜经过120 °C 退火10 min 处理后, 开路 电压(V )达到0.64 V, 短路电流密度(J )为10.25 mA ·cm-2 , 填充因子(FF) 38.1%, 光电转换效率(PCE)达到 oc