TEA5767完整收音机程序.docVIP

TEA5767完整收音机程序 /*tea5767完整程序*/ //****************************************************************************************************/ #include reg52.h #include intrins.h /***********************************************************************************/ #define max_freq 108000 //108Mhz #define min_freq 87500 //87.5Mhz #define max_pll 0x339b //108MHz时的pll. #define min_pll 0x299d //87.5MHz时的pll. #define Add_Freq 1 #define Dec_Freq 0 #define REFERENCE_FREQ 32.768 #define ATIIcxxDriverAddressW 0xC0 #define ATIIcxxDriverAddressR 0xC1 #define _Nop() _nop_(),_nop_(),_nop_(),_nop_(),_nop_() /*定义空指令*/ #define LED P0 void Initialization(void); void Get_Pll(void); void Get_Frequency(void); void Search(unsigned char mode); void Auto_Search(unsigned char mode); unsigned char GetKey(); void Delay(unsigned char Time); void Led_Display(unsigned long i); void DelayD(unsigned char Time); unsigned char GetKey(); void Delay(unsigned char Time); void ATIICxx_PWrite(unsigned char *McuAddress,unsigned char count); void ATIICxx_PRead(unsigned char *McuAddress,unsigned char count); void I2C_Send_Byte(unsigned char sendbyte); unsigned char I2C_Receive_Byte(void); void I2C_Start(void); void I2C_Stop(void); void I2C_Ack(void); void I2C_Noack(void); /*********************************************************************/ /* IIC读写程序芯片型号*/ sbit I2C_SCK=P3^0; /*实时时钟时钟线引脚 */ sbit I2C_SDA=P3^1; /*实时时钟数据线引脚 */ sbit k1=P1^7; sbit k2=P1^6; sbit k3=P1^5; sbit k4=P1^4; /*********************************************************************/ /************************************************************************/ sbit ge=P2^3; sbit shi=P2^2; sbit bai=P2^1; sbit qan=P2^0; unsigned char tab[]={ 0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};//共阳 //0, 1, 2 3 4 5 6 7 8 9 /************************************************************************/ unsigned char radio_write_data[5]={0x2d,0x56,0x20,0x11,0x00}; //初始化写入TEA5767的数据(FM89.8Mhz) unsigned char radio_read_data[5]; unsigned int Pll_Data; unsigned