变频器应用维护保养（Application of maintenance）.docVIP

变频器应用维护保养（Application of maintenance） As the frequency converter can adapt to many requirements of the production process, especially in the industrial automation control applications, AC variable frequency speed regulation technology has risen to the mainstream of industrial automation control. The performance of AC speed regulation system can be compared with DC speed regulation system, even more than DC system. It adopts a full digital control mode, which greatly enhances the ability to process information. At the same time, it will be of practical experience and skills constantly into the software function, the use of complex control can achieve control simulation in today has become possible, so that the inverter reliability, availability, maintainability function to enrich. As the frequency converter has the advantages of good speed regulation, wide speed range, high efficiency, convenient operation, and good interface with other equipment, it is used more and more widely. Over the years, we have been in the actual production of continuous learning, accumulated some of the frequency converter maintenance, maintenance and repair experience. 2 、 maintenance Due to the rapid development of power electronics technology and microelectronics technology, the inverter replacement speed is relatively fast, and constantly introduce new products, the performance continues to improve, the function is constantly enriched and enhanced. Now the domestic market sales of frequency converter brands are more, such as Danfoss, ABB, SIEMENS, GE, Schneider, etc., domestic inverter brand more, although a wide range of, but the function and use are basically similar. In general, the use, maintenance and troubleshooting methods are basically the same. In practical applications, the frequency converter is affected by ambient temperature, humidity, vibration, dust, corrosive gases and other environmental conditions, and its performance will change. If used properly and properly maintain