土方回填（Earthwork backfilling）.doc

土方回填（Earthwork backfilling） Earthwork backfill construction scheme Source: Author: Brotherhood of lively and vigorous flourishes in calligraphy date: [2010-8-20] 4, technical disclosure before construction Before backfilling, the technology department to conduct technical tests with QC operations team, the backfill area division, according to the account of compaction parameters and rolling test to determine the construction method and clear. Three, construction deployment This project was carried out according to the construction sequence of box culvert backfill, in order to adapt to and meet the construction subject of the buildings need to backfill conditions, each about 210m as a filling, the filling speed and building construction speed, continuous backfilling. Take two kinds of backfill, scheme, namely the heap of soil side using a large bulldozer to send soil excavation, the other side of the excavator with soil, dump truck from one end to rotate in place, do both sides rise evenly backfill. When the soil backfill to culvert top 1m (i.e. at 1.70), are used in place of large bulldozer. Four 、 construction methods and procedures 1 construction procedures: 2 construction methods 2.1 earthwork backfill area division 2.2 filling method 2.2.11 area: the part of earth filling soil filling is narrow and deep, inverted triangle section, backfill material can not be used directly in place by bulldozers bulldozing, in the two level platform set down soil excavator will be in place, and then artificial paving, frog ramming. 2.2.23: when the width of 1 earthwork backfilling backfilling area more than 5m when entering into the 3 District backfill soil material directly from the right side of large bulldozer in small bulldozer flat rolling; left by the free soil material unloading vehicle to rotate in place, a small bulldozer spreading and rolling, the right set of 4 D60 large bulldozer 2 sets of 74KW bulldozer, paving soil and rolling, left 5 dump truck transport, 1 sets o