室内设计人体工程学（Interior design ergonomics）.docVIP

室内设计人体工程学（Interior design ergonomics） Interior design ergonomics Interior design ergonomics (online collection of data collection) Ergonomics and commonly used interior dimensions Human engineering is an essential knowledge in interior design. Understanding human engineering can make decoration design more in line with peoples daily behavior and needs. Human engineering content mainly includes the following points: * human scale * human behavior area * dimensions of commonly used furniture equipment * building scale specifications * visual, psychological and spatial I. human dimensions The scale of the human body, i.e., the range of motion within which the human body performs various movements. The designer shall determine the width of the door, the width of the steps, the height of the window, the balcony, the size and the distance of the furniture, the stair platform and the interior height of the house. The commonly used indoor sizes are as follows: Supporting wall: thickness 0.24M Indoor partition wall: thickness 0.12M Gate: the door is 2.0~2.4m high and the door is 0.90~0.95m Interior doors: about 1.9~2.0m high, 0.8~0.9m wide door thickness 0.1M Toilet and kitchen door: wide 0.8~0.9m, high 1.9~2.0m Indoor window: high 1.0m or so, window sill distance from ground height 0.9~1.0m Outdoor window: high 1.5m window, distance from ground height 1.0m Entrance: wide 1.0m, wall thickness 0.24M Balcony: width 1.4~1.6m, length 3.0~4.0m (usually the same length as living room) Time: high 0.15~0.16m, long 0.99~1.15m, wide 0.25m, armrest width 0.01M, armrest spacing 0.02M, middle rest platform width 1.0m. Two, commonly used furniture size; Bedroom： Single bed: wide 0.9m, 1.05M, 1.2m; long 1.8m, 1.86M, 2.0m, 2.1m; high 0.35m~0.45m. Double bed: width 1.35M, 1.5m, 1.8m, long, high, ditto. Round bed: 1.86M, 2.125m, 2.424m in diameter. Cabinet: the thickness of 0.35~0.45m, width 0.3~0.6m, height 0.6m. Wardrobe: thickness 0.6~0.65m, cabinet door width 0.4~0.65m, height 2.0~2.2m. A