磨料粘结产品标志.pptVIP

摘要幻灯片;磨料粘结产品的标志;标准;定义;材料缩写;Table 1 - Abrasives 磨料;Table 2 -Grit 粒子;Table 3 -Hardness Grade 硬度等级;Table 3 -Hardness Grade 硬度等级;Table 4 – Structure 结构;Table 5 - Type of bond 粘结类型;Table 5 - Type of bond 粘结类型;Table A.1 Marking of abrasive products 磨料产品标志;Annex A marking A.1 Purpose 目的;A.2 Content of marking 标志内容A.2.1 Marking requirements 标志要求;A.2.1 Marking requirements 标志要求;A.2.1 Marking requirements 标志要求;A.2.1 Marking requirements 标志要求;A.2.1 Marking requirements 标志要求;Table A.2 - Colour codes and design of colour codes 颜色代码和颜色代码设计;A.2.1 Marking requirements 标志要求;Table A.3 -Restrictions of use (RE)使用限制;A.2.1 Marking requirements 标志要求;A.2.2 Additional Inscriptions 附加字符;A.2.2 Additional Inscriptions 附加字符;If wheels shall be mounted in a specific position on the spindle they shall be marked in one of the way shown in Figure Al. Figure A.1 _ Examples for marking of oriented wheels 导向轮标志示例 ;The mounting of several wheels to the same spindle is only permissible when the wheels and the grinding machine are designated as appropriate for the purpose by the wheel and machine manufacturer. Wheels to be multiple or gang mounted shall be marked in a manner to assure they are correctly mounted on the machine spindle. Additionally each wheel shall be identified as being part of that set。 ; Figure A.2 _ Multiple wheel mounting with corresponding spacers 装有对应定距片的组合轮;Restrictions of use shall be provided with abrasive products. They shall be given in full as in Table A3 or in the form of a pictrogram. They can also be marked with the short sign, if the full wording is given on the back of a label or placed in the smallest packaging unit 磨料产品上应有使用限制内容。内容应按表A3全文或图例形式标示。如全文在标贴背面给出或放在最小包装上，可用短符标示。;The marking can be on a label or blotter. It can also be stencilled, printed, stamped, engraved directly on the abrasive product or on an integrated foil. 标志可以在标贴或纸衬上，也可直接蜡印、印刷、打印、雕刻在产品上或整体衬垫上。;A.3.1 Abrasive products with outside diameter D 80 mm外径大于80mm的研磨产品 When it is not possible to give the