设备的安装程序（Device installation procedures）.docVIP

设备的安装程序（Device installation procedures） 1. installation procedures for kitchen equipment The kitchen appliance installation project is highly professional, standardized procedures for installation: wall, ground base treatment, install the product inspection and installation to install the bottom cabinet to connect the cabinet for water supply and drainage installation, debugging, testing and adjustment of electrical equipment cleaning. Change from: Love spell will win - Zhang Yu () According to the design of kitchen utensils and appliances, the complexity of the project, the contents of the program will change. 2. inspection before installation of kitchen equipment In order to ensure the installation of kitchen of safe and convenient use, before the installation, should arrived at the scene kitchen for inspection, inspection items and requirements are as follows: 2 man-made board finishes are not allowed in the bubbling, cracking, pollution, snow, scratches, uneven color, plate, parts of the drilling hole, the center position the relative standard deviation is less than 0.3 mm margin size F and the depth of the drawer cabinet should be matched, rail to firmly, uniform size, slide freely; artificial board barrel body, the door edge shall be sealed; the screw to be screwed flat, firm, there shall be no skew, outcrop, slipping phenomenon around the glass? The door by the edge grinding processing, glass thickness of not less than 5 mm, uniform thickness, firmly connected with the cabinet body; installation accessories complete, tight, straight, firm, with no collapse, loosening, nail, nail down, The utility model has the advantages that the bending nail and the floating nail can be provided with no small pieces or leakage parts; the opening and closing parts of the hinge, the touch bead, etc. are firmly installed and used flexibly; the door leaf and the cabinet gap are the same, and the adjacent door leaves are of the same height. 3. construction code for kitchen equipm