防火墙端口的设置)（Firewall port settings）.docVIP

防火墙端口的设置)（Firewall port settings） How to set the port ban reward points on the firewall: 5 time: 2006-9-11 12:54 | solution | questionger: lizisail Prohibit ports 69, 135, 4444 in the firewall Could you tell me how to set it up?: My computer suffers the interference of lovesan virus, want to set up... The best answer is not allowed to open as long as the default is prohibited, you do not need to prohibit, as long as you do not open the ports on the line, firewall sometimes prompts what applications access the network and through what port, as long as you dont allow the point is good, the port will not be opened Or you can use TCPIP port selection: 1, right-click on the network neighborhood, select properties, and then double-click local connection (if the dial-up Internet users, select my connection icon), pop-up the local connection status dialog box. 2, click the [properties] button, pop-up the local connection properties, select this connection, use the following items in the Internet protocol (TCP/IP), and then click the [properties] button. 3, click the [advanced] button in the pop-up Internet protocol (TCP/IP) dialog box. In the pop-up advanced TCP/IP settings, select the Options tab, select TCP/IP filter, and then click the properties button. 4, in the pop-up TCP/IP Filter dialog box, select the enable TCP/IP filter check box, and then leave the TCP port on the left only allowed to choose Even if you dont understand the strategy, you can follow the steps below to disable the port. One, 139, for example 1. start control panel (or management), management tools - local security policy 2. right click the Ip security policy, on the local computer, and select manage IP filter tables and filter operations, you can start the management IP filter list and filter operations dialog 3. in the manage IP filter table, press the Add button open IP filter list 4. in the name of tim (N) under the Prohibition of 139 port any name is OK, as long as you know it. Descriptio