地面环氧树脂（Ground epoxy resin）.doc

地面环氧树脂（Ground epoxy resin） I. construction preparation 1. Material preparation 1.1 main materials: Epoxy resin leveling coating, base treatment agent (base oil), surface treatment agent, filling repair putty, fillers, such as quartz sand, quartz powder. Epoxy resin leveling coating is mostly double component at present. It should be well mixed according to a certain proportion, and the quality standards are listed below. Table 1 technical parameters of epoxy resin leveling coating Test project technical index Even without hard coating The film is smooth and smooth in appearance Dry drying schedule (25 DEG C) less than 4 h Work (25 C) less than 24 h Wear resistance (750g/500r), g = 0.04 Adhesion (level) is less than or equal to 1 Hardness (pendulum method) = 0.6 The ratio is more than 0.87 Gloss (%) = 30 Impact resistance, 40Kgcm, no cracks, wrinkles and peeling phenomenon Water resistance, 96h, no exception Alkali resistance (10%NaOH), 96h, no exception Salt tolerant (10%NaCl) 96h without abnormality 1.2 storage and transportation: Airtight storage and transportation, avoid packing damage and rain. Place in a dry, ventilated place, avoiding high temperatures, sun exposure and freezing. The storage period is 6~12 months at 5-40 degrees centigrade. 2. Equipment preparation: 2.1 brush or roller, barrel, low speed agitator (400 RPM) or electric stirring gun, special shoes, trowel, special needle tooth scraper, gas cylinder. 2.2 construction machines should be cleaned before use. After use, the tools should be cleaned in dry and solid time, so as not to affect the next use. 3, grassroots treatment: 3.1, the construction of grass-roots level should be smooth, rough, clear floating dust, old coating and so on, to reach more than C25 strength, and for water treatment, no water, clean, dense. It shall not be loose soil, loose particle, gypsum board, coating, plastic, vinyl ester, epoxy resin, and adhesive such as adhesive residue, oil pollution, paraffin, curing agent and gr