试验员考试题库《4》（Test questions bank 4）.doc

试验员考试题库《4》（Test questions bank 4） 1.. 1. test method of compaction degree and its application situation. The sand filling method: applicable to the determination of grass in the field (or base), density and degree of compaction of various materials gravel compaction layer and subgrade soil, density and compaction is also suitable for asphalt surface treatment, asphalt penetration layer, but not suitable for rock fill embankment with compaction test large holes or porous material. The cutting ring: for testing on the density of fine-grained soil and fine grained soils stabilized with inorganic binder. But the stability of fine grained soil with inorganic binder should be no more than 2D, and it should be used in the compaction test during construction. (3) nucleon Law: suitable for nuclear density meter on the spot, measure the density of subgrade or pavement material by scattering or direct transmission, and calculate the degree of construction compactness. It is suitable for on-site quick assessment of construction quality, and shall not be used for arbitration test or assessment acceptance test. The core drilling method: apply to the inspection from the compaction of asphalt pavement on drill core samples of asphalt mixture specimen density, to assess asphalt surface layer construction compaction, density detection of material stabilized base and subbase combination is also applicable to the older age of inorganic. 2., 2. sub item quality inspection, why should first check whether it meets the basic requirements? The basic requirements listed in each sub item include the main points of the relevant regulations, which play a key role in the quality of the construction and shall be carefully checked according to the basic requirements. When the inspection fails to meet the basic requirements, the quality inspection and evaluation of the project shall not be carried out. Because the basic requirements have the right to veto the quality, the basic requirements should