基于cfd软件的搅拌罐开发和优化论文（Development and optimization of mixing tank based on CFD software）.docVIP

基于cfd软件的搅拌罐开发和优化论文（Development and optimization of mixing tank based on CFD software） CFD software based on the development and optimization of mixing tank, paper.Txt with joy to run, attentively listen to, use thinking to develop, with the effort to struggle, with the goal to measure, use love to live. More money, less money, often good! It is better to be young and healthy! His home is rich, harmonious. This article is contributed by lhDOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Development and optimization of mixing tank based on CFD software Abstract: mixing cans are widely used in the fields of paper making, chemical industry, petrochemical, pharmaceutical, food processing and biological chemical engineering. In the amplification and reactor design, because the reactor single-phase and multiphase fluid flow are very complex, the researchers use some dimensionless parameters and global value of global experience, based on semi empirical correlations, the mathematical model of fluid mechanics to further. In order to fully understand the flow characteristics in stirred tank, the flow characteristics of stirred tank are numerically studied on the basis of computational fluid dynamics (CFD) theory. The multiple reference frame method is used to simulate the impeller. The mixing characteristics of stirred tank are simulated at different blade radius and different rotating speed. The optimum results of mixing are obtained by comparing the simulation results. Keywords: stirred tank; keywords; numerical simulation; CFD; 1. Preface Mixing is one of the most common and important unit operations in chemical industry. The main objective is to accelerate the mass transfer or heat transfer process. For mechanical mixing equipment, the mechanical energy can be converted into kinetic energy of the fluid through the stirring impeller in the rotation, thus forming