塔吊安全交底（Tower crane safety disclosure）.docVIP

塔吊安全交底（Tower crane safety disclosure） DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Tower crane safety test tower crane safety disclosure Construction unit: construction unit: China Construction two Bureau three company Project Name: tower crane safety operation specification disclosure contents (1) of the tower crane rail foundation or concrete foundation must go through design, inspection before use, should be based around the building slope and drainage facilities, and to maintain a safe distance from the pit. (2) the tower crane foundation soil bearing capacity must be strictly according to the original provisions or comply with the tower: medium for 8 ~ 12t/ square meters, the heavy tower is 12 ~ 16t/ square meters. (3) the disassembly and assembly of the tower crane must be carried out by the professional team which has obtained the qualification certificate of disassembly and assembly issued by the administrative department of construction, and the technical and security personnel should be present in the process of dismounting. (4) and personnel should wear safety protection products, should fasten the safety belt when working at height, familiar with and implement disassembly process and operation rules. (5) the lifting, installation and disassembly shall not be carried out when the wind reaches over four. Check the connection of all parts of the hydraulic jacking system before jacking up. No swing arm and other operations are prohibited during jacking. (6) after the tower crane is installed, the technical inspection and adjustment of the whole machine shall be carried out, and shall be ready for delivery after passing the inspection of the whole stage and the whole machine. In the case of no load, the deviation of the verticality between the tower and the ground shall not exceed 4/1000. The motor and hydraulic parts of the tower crane shall be carried