激光焊机使用（Laser welding machine use）.doc

激光焊机使用（Laser welding machine use） 2009-07-11 12:24 54 welding knowledge reading comments in small number: 0 greatly: daily maintenance of laser welding machine note: laser maintenance must be carried out by specially trained personnel, otherwise easily lead to serious damage. 1) in order to ensure that the laser has been in normal working condition, continuous operation after two weeks or stop using a period of time, before the boot first... Daily maintenance of laser welding machine Note: the maintenance of the laser must be carried out by specially trained personnel, otherwise it is likely to cause serious man-made damage. 1) in order to ensure that the laser has been in a normal working state, continuous work for two weeks or stop using for a period of time, before starting the first response to the components of the YAG bar, medium diaphragm and lens protection glass optical path for inspection, to determine the optical components have no abnormal phenomenon of dust pollution, mildew, such as this phenomenon should be processed in a timely manner, to ensure that all optical components can not be damaged under intensive laser irradiation. (if the use of the equipment is relatively clean, the inspection can be extended to one month or even longer) 2) the purity of cooling water is the key to ensure the efficiency of the laser output and the laser cavity component life, use should be checked once a week in the conductivity of the circulating water, the conductivity of 30.5MW and cm, the monthly deionized water should be changed once the inner cycle of water injection, the new conductivity must be 32MW - cm. Always observe the color change of the ion exchange column in the cooling system. Once the resin in the exchange column becomes dark brown or even black, the resin should be replaced immediately. 3) the equipment operating personnel can often use black paper check the laser spot, once found the phenomenon of uneven spot or energy loss, should be timely to the la