电镀知识（Plating knowledge）.docVIP

电镀知识（Plating knowledge） 1. definition and classification of electroplating Definition of 1-1-1. plating Electroplating is the use of electrolytic methods to deposit metal or alloy on the surface of the workpiece to form a uniform, dense and good bonding force The metal layer is called electroplating. A simple understanding is a physical or chemical change or combination. The application of electroplating process, we usually do the following uses: A. corrosion protection B. protective decoration C. wear resistance D. electrical performance: according to the work requirements of parts, provide conductive or insulation coating E. process requirements Introduction of 1-1-2. common coating methods Electroless plating (autocatalytic plating) Autocalytic plating On the surface of the activated substrate, the metal ions in the bath are reduced to form a metal coating. This is in us Most of the process involved in a process engineering, through such a process in order to carry out late electroplating and other processing Pretreatment process for plastic parts. Electroplate Electroplating The process of forming uniform, dense, and well - formed deposits of metal or alloy on the surface of a workpiece by electrolysis More complex, but it has many advantages, such as more types of metal deposition, can get the color variety, compared to similar engineering Art is comparatively cheap. electroforming Electroforming The process of depositing or depositing metal on a mold by electrolysis, separating the mold from the metal deposits. This method of handling is that we require the final part to have special surface effects, such as clear and distinct parting lines or special lines In the case of an acute angle, the copper alloy is usually used as the shape of a component, and the alloy is deposited in the process by electroplating On the surface, usually the deposition thickness of up to tens of mm, after cavity incision, respectively to form inlaying cavity mold, injection molding,