rcm分析的一般步骤（General steps of RCM analysis）.docVIP

rcm分析的一般步骤（General steps of RCM analysis） General steps of RCM analysis 2011-02-04 11:11:50 Author: SystemMaster source: [] [] text size: small in large. 1, RCM analysis of the required information For RCM analysis, the following information should be collected as far as possible to ensure that the analysis is carried out smoothly. Product survey. Such as product structure, function (including hidden function) and redundancy; Product fault information. Such as failure mode, failure cause and effect, the product failure rate, fault criterion, fault potential development to failure, failure and potential failure detection method; Maintenance information of products. Such as the maintenance of equipment, tools, spare parts, such as the human; Expense information. As expected, the development cost of the maintenance costs; Similar information of similar products. The The general steps of 2 RCM analysis The general steps are as follows: the RCM analysis To determine the important function of the products (FSI); Analysis of the failure mode and effect (FMEA); The application of logic decision diagram to select the preventive maintenance work of the type; System synthesis, forming plan. 2.1 important function products are determined Equipment is composed of a large number of components, these components have specific functions, but also may fail. Some of the consequences of failure to endanger the safety, some have a direct effect on the completion of the task, and most of the fault has no direct impact on the overall equipment fault occurs, the timely elimination is, the only consequence is that after the repair costs, and the cost will generally prevent the repair cost is lower than. Therefore, it is not necessary to analyze all the thousands of parts one by one when making a maintenance program. The preventive maintenance program works only for a relatively small number of products, namely: important functional products. They are products that can affect the mission