siemens840d_5轴(rtcp)功能解释（）.docVIP

siemens840d_5轴(rtcp)功能解释（） Siemens840D 5 axis (RTCP) function explanation RTCP, function, explanation This post was edited by LjG at 12:28 on 2009-5-10 Siemens840D 5 axis (RTCP) function explanation: TRAORI 5 axis conversion Universal cutting head Here, three linear axes (X, Y, Z) and two oriented axes (C, A) are used to determine the positioning angle and the working point of the tool. One of the two axes is set as an oblique axis, and here is A(in many cases, 45 degrees). In the example presented here, you can see the arrangement of the universal combination cutter head of the CA with the machine tool moving system! Machine tool manufacturer The axis order of the directional shaft and the direction of movement of the tool depend on the type of machine tool that is passed through the machine tool data. In this case, A is located at an angle from the X axis to Phi Generally applicable to the following relationships: Athe X axis at the angle phi Bthe Y- axis at the angle phi Cthe Z axis at the angle phi Angle can be designed from 0 to +89 degrees through machine tool data. With a rotatable linear axis This condition is related to the arrangement of the moving workpiece and the movement of the tool. The movement consists of three linear axes (X, Y, Z) and two right angles Rotation axis synthesis. For example, a first rotating shaft is moved by a slide with two linear axes, and the tool is parallel to the third Linear axis. The second rotating shafts rotate the workpiece. The third linear axis (steering shaft) is on the plane of the cross slide. The axis order of the rotating shaft and the direction of movement of the tool depend on the type of machine tool that is passed through the machine tool data. Apply to the following relationship: Feed shaft order: First rotating shaft A, A, B, B, C, C Second rotating shaft B, C, A, C, A, B Steering linear axis Z, Y, Z, X, Y, X For further directions on tool orientation, configurable axial order, see also Document: /FB3/ functi