七氟丙烷机房气体灭火系统设计（Design of fire extinguishing system heptfluoride propane gas room）.docVIP

下载本文档

6
0
约1.48万字
约 14页
2017-08-20 发布于河南
举报
版权申诉

七氟丙烷机房气体灭火系统设计（Design of fire extinguishing system heptfluoride propane gas room）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

七氟丙烷机房气体灭火系统设计（Design of fire extinguishing system heptfluoride propane gas room）

七氟丙烷机房气体灭火系统设计（Design of fire extinguishing system heptfluoride propane gas room） 1. fire extinguishing agent The chemical molecular formula CF3CHFCF3 HFC227ea heptafluoro propane, its quality should meet the corresponding safety technical indicators. 2. protection zone The delineation of protected areas shall meet the following requirements. (1) the protection area should be divided into fixed single enclosed space; when the ceiling and floor of the same section need to be protected at the same time, it can be a protective zone. (2) when using the pipeline fire extinguishing system, area is a protected area more than 800 square meters; the volume should not be greater than 3600m3. (3) when using prefabricated fire extinguishing device, area is a protection area more than 500 square meters; the volume should not be greater than 1600m3. (4) the minimum environmental temperature of the protected area should not be lower than -l0 degrees centigrade. (5) the fire resistance of the enclosure, enclosure structure and doors and windows shall not be less than 0.5h; the fire resistance of the ceiling shall not be less than 0.25h. (6) the allowable pressure of the retaining structure of the protected area under internal pressure shall not be lower than 1.2kpa. (7) fire protection zone should be maintained in the closed condition, in addition to opening pressure relief opening outside, as well as for fire protection zone of the valve of the ventilator and ventilation pipe, to discharge propane before should be closed. (8) protection zone of the pressure orifice should be set up in the walls, should be located in the protected area height above 2/3. The pressure release area is calculated by pressing: Fx=0.l5*Q/ (Pfx0.5) Fx---- orifice area (MZ); Q 117 The average discharge rate in fluorine propane protection zone (kg/s); Pf the allowable pressure (Pa) of the retaining structure to withstand internal pressure. When the protective area of an elastic door closer or a spring door