共轭曲线（Conjugate curve）.docVIP

共轭曲线（Conjugate curve） A pair of tooth profiles that can mesh with the basic laws of engagement are called conjugate teeth C The transmission ratio of a pair of gears engaged with each other in any position is meshed with the center line of the gear, and the tooth profile is inversely proportional to the two segments divided by the common law line at the contact point. This law is called the basic law of tooth profile engagement. Conjugate (Conjugate), have some common characteristics in relation to each other, but also have individual properties instead of the characteristics of the mathematics a+bi and a-bi called the conjugate, two roots of quadratic equation with one unknown ax2+bx+c=0 called conjugate roots; physics, according to the principle of reversibility of light, in the case of a screen distance (more than 4 times, with focal length) conjugate relationship between the convex lens and things like, called conjugate, AC circuit, if Omega C is equal to the inductance of the capacitor elements, called conjugate impedance and so on; chemistry, refers to two or more double (or triple) the single linked that occurs is an electronic effect. In conclusion, conjugation is related to symmetry. Conjugate curve A pair of curves on the conjugate, Quxian, gonge, curves, two components to achieve a continuous tangency of a given motion law. The curve and cusp contact can be seen as a special case of conjugate curve. In a gear drive, one gear drives another gear, and in the cam mechanism, the cam pushes the follower to move in accordance with the required law, and is accomplished by conjugate curves. Single gear transmission is made by a pair of conjugate tooth profile curve can be obtained to meet the requirements of transmission ratio (such as rotating cylindrical gear), or rotate and move the motion conversion (such as gear and rack drive), also can obtain variable motion (such as non circular gear transmission). As a pair of plane motion, the conjugate curve is the sam