北京四季商城中庭消防给水系统设计的探讨（Discussion on Design of fire water supply system in atrium of four seasons shopping mall in Beijing）.docVIP

北京四季商城中庭消防给水系统设计的探讨（Discussion on Design of fire water supply system in atrium of four seasons shopping mall in Beijing） Find out the cause of the vacuum. In order to remove and prevent the condenser wall soft dirt attached or organic When the object is generated, the rubber ball can be used to wash the condenser copper pipe continuously during operation Wall. By using the rubber ball cleaning method, the copper pipe of the condenser can be effectively prevented without stopping the machine An organic substance that develops without damaging copper tubes. 2. Guarantee the quality of condensate water In addition to ensuring the quality of the condenser to ensure that all the copper pipes are leaking, Operation should also pay attention to the condenser steam side temperature can not be too high, in order to prevent copper pipe The expansion of the mouth and leakage. In addition, to prevent the generator from leakage, the DC current is caused by the action of the copper tube Electrochemical corrosion and leakage. To prevent this corrosion, add it to the appropriate position in the water chamber A zinc block is applied to make the electrochemical action occur with the zinc block, thereby protecting the copper tube. Second is to pay attention to the quality of water supplement must be qualified. In addition, it is also necessary to ensure that the cooling water is condensed, and the cooling degree of the condensed water is the most Within a small range. Submission Date: 2006- 01- 08 Editor in chief: Zhao Jing Discussion on Design of fire water supply system in atrium of four seasons shopping mall in Beijing On (China Architectural Science Research Institute China Building Technology Group Co., Ltd.) Xin Dan (Beijing Kang Cheng Artificial Environment Engineering Co., Ltd.) This article analyzes and summarizes the design of atrium fire fighting water supply system in Beijing four seasons mall project, and probes into the problems encountered in the design, aiming at the s