性能测试流程（The performance testing process）.docVIP

性能测试流程（The performance testing process） The performance testing process software test The performance test is divided into four stages, namely: starting stage, preparation stage, implementation stage, analysis stage, each stage has a plurality of steps. Start? 1 determine the test target 2 define roles / tasks The preparation stage? 1 Selection of test tools To prepare for the 2 test data 3 load analysis 4 create test cases / scenarios 5 set up a test environment 6 preliminary test The implementation stage? 1 the implementation of performance test The analysis phase? 1 test data analysis 2 test report 3 remove the test environment A number of steps in each stage can be serial, also can be parallel, in order to speed up the test schedule. But basically no parallel between stages. The following sections will detail the work contents of each stage and each step should be done. 3.2 start stage 3.2.1 determine the test target In the performance testing process, the testing team must be goal oriented test. The test objectives must be clear, specific, measurable. That is, the ultimate goal of performance is sometimes used as a test target, but it may not be up to the. If you reach the final performance goals, one may need to optimize performance and adjustment, including the application of the adjustment; on the other hand, modify the performance index is sometimes necessary. 3.2.2 defines the roles and tasks The performance test work required by a group to complete. At every step of the analysis and understanding of the test will be performed after the need to analyze the number and the work skills needed personnel requirements, the formation of a working group. 3.3 preparation stage 3.3.1 test tool With functional testing, performance testing usually have various testing tools available. But it is not the same as the function test and performance test, often completely using the test tool, rarely completed by hand; and the function test must rely on manual testing, testi