离心螺杆对比（Screw centrifugal contrast）.docVIP

离心螺杆对比（Screw centrifugal contrast） Comparison of centrifugal compressor and screw compressor The basic principle of centrifugal compressor The centrifugal compressor is pressure machine, is a kind of turbo compressor. The turbine is English transliteration of TURBINE, namely the rotation of the impeller. In the full low pressure air separation device, is widely used in centrifugal compressor, centrifugal compressor has appeared gradually replace the trend of piston compressor. A centrifugal compressor: gas refers to the movement in the compressor is along the radial direction perpendicular to the axis of the compressor. Two, the working principle is: the working wheel in the rotation process, due to the effect of rotating centrifugal force and wheel flow, the gas pressure increased, the speed is also improved. Then in the diffuser to further speed can be transformed into pressure energy. Through which the gas pressure increased. Three, characteristics: Centrifugal compressor is a compressor speed, compared with other compressor: Advantages: the large amount of exhaust, exhaust air flow evenly, no pulse. The high speed. The machine does not need lubrication. The good sealing effect, less leakage. There is a flat performance curve, operating a wide range. It is easy to realize automation and large scale. Is the vulnerability of small, low maintenance, long operation period. Disadvantages: poor adaptability to operation, gas properties have great influence on the operation performance. In the drive unit, parking, operation, load changes. The air flow velocity, flow friction loss of large parts. With the surge of the machine, great harm. Four, scope of application: Large discharge and low pressure. Five, classification: By type: single shaft shaft multi-stage, a shaft series of several impeller. Four double stage, both ends of the four impellers are respectively arranged on two cantilever small gear, rotating big gear * motor through the drive pinion. According to the c