车库门匹配方法（Matching method of garage door）.docVIP

车库门匹配方法（Matching method of garage door） Zhongtian The code: press the P button 2 seconds to enter the program, then press the P button several times to the LED-7 lights flashing, press the + button, LED-7 lights changed by the flashing light, press the buttons on the remote to any key for 2 seconds, LED-7 lights from lit into bright, flashing lights and other lights until LED-7 often bright after press P to save, then press the P button several times to exit the program, LED-3 lights lit, success of the code. Fire Code: LED-7 lights flashing Press - key for 3 seconds after the LED-7 light is lit by bright, at this time all the remote password are eliminated, press the P button to save the settings and exit the program several times. People The code: in the standby mode, press the button for code (K2) and release of code lights always said in the study, according to the remote control to learn any key 2, the code light flashing 8 times out after the return to standby mode, learning to complete. Fire Code: in the standby mode, press the button for code for at least 8 seconds out of code light to standby state, all remote control clearance. A, Shipley Te: The [5P] + - P 000 (1) press the P button for about 3 seconds, LED digital tube display 1, the key is released. (2) according to the P button for 4 - 5, when a LE to press the + button will appear L, the code for learning. (3) use the remote control to the red button, quickly press 4. (the first 2 double click, and then double-click 2) (4) of the code, wait again 5P, available remote control. Remember: in the operation screen can not be arbitrary according to the + - button, otherwise, can not use the garage door!!! Two, master: After the cover is opened, in the circuit board: remote control button, press the button for code direct learning. Three, horse: According to the outside of the S button for learning. Four, Wright: The motor behind a button or cover. According to a study. Five, jiahe: K1 K2 K3 K4 O O O O (by K