ssd及读写速度（SSD and read and write speed）.docVIP

ssd及读写速度（SSD and read and write speed） SSD refers to the SSD, actually refers to the use of flash flash memory for storage hard disk media. The hard disk is not the traditional mechanical structure of hard disk, dont worry about the damage caused by collision, Read and write speed can be easily reached 100MB/S. Parallel hard disk with ATA133 interface, the data transmission rate of the maximum value is 133MB/s; the hard disk serial Serial ATA data transmission rate of 2 to 300MB/s; the DDR400 memory data transmission rate of 6400MB/s is the largest double channel. Intel solid state disk read and write speed of over 500MB/s 2008-09 listed USB read 30M/s write 10M/s the rate has been very good 2008-10 General USB 2 USB speed is almost read about 12M/s wrote about 4M/s 2008-10 SSD SSD (solid state disk) SSD The current hard disk (ATA or SATA) is a type of disk, data is stored in the disk sector, Solid state hard disk data is stored in the chip. The SSD consists of a control unit and a storage unit (FLASH chip), That is simple with solid-state electronic memory chip array made of hard disk. Because SSDs have no hard disk The rotation of the medium, and thus excellent shock resistance, and wide working temperature. Widely used in military, automotive, industrial control, Video monitoring, network monitoring, network terminal, electric power, aviation, navigation, medical equipment and other fields. Based on non permanent memory Solid state disk is made of non permanent memory is mainly used for temporary storage. Because this kind of memory need to rely on The outside power to maintain its memory, so the SSD made therefrom need with the use of battery can. Non permanent memory, such as SDRAM, have access to high speed. Use this feature, It will need to run the program first from the hard disk to conventional solid-state hard disk, and then handed over to the computer to execute, This can be avoided due to the hard start and stop delay, seek delayed impact on program perf