『手机摄影技巧教学』让85的500w卡尔蔡司物尽其用（Mobile phone photography teaching let 85 500W Carle Zeiss material）.docVIP

『手机摄影技巧教学』让85的500w卡尔蔡司物尽其用（Mobile phone photography teaching let 85 500W Carle Zeiss material） This paper contributed by wankangming. With the small 8 also have a period of time, in the aspect of photos always feel sorry this 500W Carle Zeiss camera, so I collect some tips and information on the Internet, feel very good, now put out to share with you, hope you will love oh, many words a bit, if patience you can still learn something! Not much to say, turn to the question: 1, steady shot Love with a mobile phone camera users may have deep feeling, if when the shooting hand control instability, good light is ugly to shoot out. Especially the CMOS type camera is more sensitive to the slight vibration stability will directly affect the imaging effect. The mobile phone camera delay phenomenon is more obvious, the speed of the camera not so fast, if using an external camera mobile phone camera, this delay phenomenon will be more obvious. Press the camera shutter in the mobile phone is not immediately after the shooting, but when the shutter sound to the viewfinder, so the best time to take pictures set the shutter sound, in the press the shutter moment if the hand shake, and photos will be sent false or ambiguous. So we must steady mobile phone in the shooting, as far as possible in the finished for one or two seconds and then move, keep his position until the photo shoot is complete. At the same time we must pause in the press the shoot button, wait one or two seconds to see shooting. In the shooting, the right hand machine at the subject, you can use the left hand to hold the right hand, to maintain stable. It is best to use two hands to control the mobile phone screen, in any case is to try to alleviate shaking, the most taboo shot while walking the way, this is the largest one. This is a special case for shooting mode to use, remember the picture is the first condition of dynamic photo stability. Mobile phone can be carried out through the LCD viewfinder screen, camer