lcd测试方法（LCD test method）.doc

lcd测试方法（LCD test method） Standard Test Method for LCD TV 1) image channel noise limited sensitivity of the three step signal VHF is less than or equal to 51dB V UHF = 54dB V = 54dB V supplementary channels (2) selective whole white field signal level: image channel noise sensitivity limited nominal value -1.5MHz = 35dB -1.5MHz = 30dB +8MHz = 40dB following +8MHz more than 30dB (3) if rejection level than the white field signal: image channel noise sensitivity limited nominal value of more than 45dB (4) false inhibit level than all the white field signal: image channel noise sensitivity limited nominal value VHF = UHF = 40dB 45dB (5) crosstalk suppression ability 50% gray signal, signal level 70dB = 80dB (6) the color sensitivity of standard color signal is less than or equal to 37dBu (7) automatic gain control of static characteristics of the AGC standard color signal is greater than or equal to 60dB (8) sound sensitivity standard color signal, sinusoidal signal modulation 1kHz, 54% VHF V = 22dB V UHF = 25dB (9) automatic frequency control AFT standard color signal, signal level 70dB +1.0MHz = FP = 0.7MHz (10) inhibition of color subcarrier and sound in intercarrier interference standard color signal, signal level 70dB 1kHz sine signal modulation, 54% more than 8dB (11) the color stability of standard color signal synchronization, signal level 70dB; PAL and NTSC were measured to keep the range is not inferior to the 300Hz into the range is not inferior to 200Hz (12) achromatic circuit function standard color signal, the signal level of 70dB is less than or equal to -16dB (13) synchronous scanning range chessboard signal, signal level 70dB for maintaining range is not inferior to + 400Hz for introducing range is not inferior to the field synchronization range is greater than or equal to 4Hz + 200Hz (14) full screen, maximum brightness, full white field signal, contrast, brightness maximum, according to specification requirements (15) the white balance error of 50%WHI