鱼缸过滤器制作（Aquarium filter manufacturing）.docVIP

鱼缸过滤器制作（Aquarium filter manufacturing） The preliminary knowledge and basic skills of aquatic plant The aquarium, the height of the 1 planting plants The water level height as far as possible in the 45 cm to 60 cm, mainly to light penetration into the fluorescent lamp! More than 60 cm will affect the fluorescent light penetration, may lead to small plants cannot receive enough light; even when using a metal halide lamp is the best water level will remain at 67 cm below, maintenance and pruning on water and high cylinder are not easy days after. Of course, less than 45 cm will affect the overall appearance of the aquarium. More important is if the distance from source to the water level of the aquarium is too close, not deep enough and will often cause water by exposure to the light is too strong, finally due to dehydration and necrosis. Water dehydration is often manifested in: red red to purple grass; grass bud small or unhealthy curly atrophy. The aquarium, the width of the 2 planting plants Put out the lamp into general use width: 70 cm in length to the aquarium 120 cm in width should be 40 cm above the best can reach 60 cm that can be placed four sets of special aquarium lamp bracket and so deep but also for the aquarium landscaping. 3, lighting The lack of lighting quality and price considerations for tools, recommended NEC-HG type tube type 865; Philips lamp; Queen of whales and Sylvania ultra light or sun halogen tube. To remind the general lighting is not suitable for use in plants! In these brands, we are the most commonly used is NEC-HG. Unfortunately, the market of counterfeit NEC lamp when buying a lot, with a hard object in the brand mark on the tube scraper can scrape, fake, genuine mark will not be scraping! And pay attention to type HG, lamp holder should pay attention to when purchasing the reflective material, corrosion resistance and water resistance, the domestic brands in the aquarium I recommend ATMAN. In addition, the need to pay attention to t