接触网答辩题（Contact defense questions）.docVIP

接触网答辩题（Contact defense questions） The composition and effect of 1. of main circuit main circuit conduction factors, how to control the main circuit quality? Answer: feeder, Internet point, track electrical connection, the anchor joint is electrically connected with the suction line (choke transformer), grounding wire and wire clamp, return line (line); the main influencing factors of main circuit are oxidation, pressure, contact and control method of the main circuit quality state: add try temperature monitoring and maintenance measures such as often. Note 2.V shaped skylight 3. reasons caused by disconnection of contact line disconnection have? Answer: the following causes of breakage: (1) burn Because the contact line burned out are the following; The electric connecting clamp and the contact line is bad or the electric connecting clamp and the contact line contact current carrying surface is not enough, causing the contact line burn, burn broken. The hanger, positioning, etc. the electric connector loss caused by catenary on electric locomotive, vehicle, burn, burn off short circuit discharge contact line. The catenary after the break to the earth or electric locomotive and vehicle short-circuit discharge, caused by injury, burn the contact line. The flashover or breakdown caused by short circuit of the earth contact discharge, burn, burn off the contact line. The electric locomotive and combined frame section, power line disconnection and catenary conductive parts or between the lap, causing injury, burn off the contact line. The electric locomotive support insulator breakdown or explosion caused the catenary of locomotive, earth short circuit, causing the contact wire wound, burn. The freight train accident caused by contact line break. The tunnel through the ice, hanging icicles on the tunnel walls or vault discharge, cause contact line break Make contact line break to electric locomotive internal grounding fault. The fault broken bow net contact line. (2) bre