溴化锂冷水机组（Lithium bromide chiller）.docVIP

溴化锂冷水机组（Lithium bromide chiller） The lithium bromide absorption refrigeration machine is using LiBr solution as absorbent and water as refrigerant, the use of water under high vacuum evaporation and heat absorption refrigeration is realized. For the refrigeration process can continuously carry on, after the evaporation of refrigerant water vapor absorbed by the LiBr solution, dilute solution, this process occurs in the absorber, and the heat energy, heating the solution to water is separated, and the solution concentration, this process is carried out in the generator in. The steam generator in the condenser condenses into water, evaporated after throttling sent to the evaporator. So the cycle to achieve the purpose of continuous cooling. The lithium bromide absorption type refrigerating machine is mainly composed of an absorber, generator, condenser and evaporator of four parts. The From the dilute solution of lithium bromide absorption, a solution pump (i.e. generator pump), boost the solution heat exchanger, the heating temperature is high temperature concentrated solution generator increased after entering generator. By the heat transfer tube of heating steam heating in the generator, the solution temperature increased until the boiling water in the solution gradually evaporated, and the solution concentration increasing. Single effect LiBr absorption chiller heat steam pressure is generally 0.098MPa (gauge). The water vapor evaporated refrigerant in the generator upwards through the liquid baffle into the condenser, liquid baffle vapor liquid separation, to prevent the droplets with the steam enters the condenser condenser. The condenser tube into the cooling water pipe, so water vapor refrigerant cooled by cooling water is condensed into water, the refrigerant water. Accumulate in the water at the lower part of the throttling refrigerant flowing into the evaporator condenser, because the condenser pressure is higher than the pressure in the evaporator. Such as