特快速补漆技术工艺流程（Special quick coating process）.docVIP

特快速补漆技术工艺流程（Special quick coating process） Super fast paint process (1), to determine the repair range: carefully check the damage location, damage if more than three molecules of the components should adopt excessive repair repair. Excessive repair is varnish components spraying paint from damage to the original paint at over the maximum retained the original car paint, but also avoid the problem of color difference. Because after polishing, primer, paint, varnish and mouth more than three of the two components of the three molecular molecular damage, the remaining part is very few, and lose the significance of repair. (2), to determine the damage degree of shallow scratches: if it is not need to play the putty, can be directly polished until no traces can be carried out on the next step, if the depth of scratch or pits need to hit the putty, you need to do if the deformation of sheet metal processing. (the use of imported quick drying putty putty a minute drying). (3) construction, protection: prepare the relevant materials and tools, taped and outside of the damaged parts, especially the corner parts should be paid more attention to, prevent the damage caused by grinding is unnecessary. (4), bottom processing: clean the damaged parts of the surrounding sediment, if deep scratches will need to make a start with putty putty, P240 sandpaper burnish rough putty damage improve adhesion, according to atomic ash and curing the damage size amount of mixing agent (ratio: atomic ash 100: curing agent 2-4 according to time and temperature) scraping first compaction pit or scar and then the scraper was 45 degrees scraping injury site is slightly higher than the surface of the parts, improve the drying rate with the iodine tungsten lamp baking. After drying with P320 sandpaper smooth and P800 sanded smooth can be primed. If it is shallow scratches can directly use P320 sandpaper (preferably with a clean dry grinding equipment in order to improve the speed and reduce the damag