一种新型升降压LED驱动电源.pdfVIP

一 种新型升降压LED驱动电源 陆治军 ． 王 强 (1．重庆市电力公司，重庆400014；2．重庆大学电气工程学院，重庆400044) 摘要：现阶段利用发光二极管(LED)作为快速光源十分普遍。随着LED功率不断提高，高亮度的LED灯具有取代传 统照明灯具的趋势，应用潜力非常大。提出了一种新型升降压变换器作为高亮度白光LED灯的驱动方案。主电路由前 级Boost和后级Buck组成。采用固定导通时间控制策略。实行前级限幅后级闭环控制，结构简单，无需补偿电路，动态 响应速度快。建立了主电路的稳态与小信号模型，对控制环路进行了理论分析，运用PSIM软件进行了仿真验证。 关键词：发光二极管驱动；升降压变换器；固定导通时间控制 中图分类号：TM 53 文献标识码：A 文章编号：1002—087 X(2010)12-1287-05 A Dovel Boost—Buck LED driver LU Zhi-jun ．WANG Qiang rJ Chongqing City Electric Power Company,Chongqing 400014，China； 2 College ofElectrical Engineering,Chongqing University,Chongqing 400D44．China) Abstract：Nowadays，light—emitting diode(LED)is applied as fast light soume widely，the high light LED has a big potential of application and is trying to take the place of classic light source．A novel Boost-Buck converter as high brightness white LED lamp driver circuit was provided in this paper． The main circuit was composed Of Boost part ahead and Buck part behind，using constant on-time(COT)contml strategy，limiting the range of former part and controlling back—end with closed loop．1t has simple structure， need no compensate circuit and has fast dynamic response． The static mode and smalI signal mode of the converter was made and the principle of controI loop was analyzed and the system circuit with PSIM was simulated in this paper． Key WOrds：LED driver；Boost—Buck converter；COT control mode 近年来，随着技术进步，发光二极管(LED)的功率逐步增 制，频率改变对滤波器设计带来麻烦，也限制了它的应用。文 大，在照明领域得到广泛应用。LED具有体积小、寿命长、抗 献[6]将电感电流纹波叠加到输…电压上再进行COT控制， 振动性强、驱动电压低、反廊速率快、耗电少、发热少、色彩纯 在一定条件下可以避开相位滞后问题，但存在稳念误差，加入 度高等优点…，发展潜力十分巨大。 误差积分电路后动态性能有所下降。本文捉l叶I一种新型可升 LED的电气特性决定了其发 光线的亮度及波长依赖 降压LED驱动电路，利用其可升降