2014位设置新方案.doc

耀州区孙思邈中医院岗位设置方案 （试行） 为深化医院人事制度改革，科学合理的设置医院工作岗位，建立健全岗位管理制度，实现单位人事管理的科学化、规范化和制度化，根据国务院办公厅《关于县级公立医院综合改革试点的意见》（国办发〔2012〕33号）、《陕西省深化县级公立医院人事制度改革意见》（陕人社发（2012）14号），及《陕西省人民政府关于推进县级公立医院综合改革的指导意见》（陕政发 〔2012〕9号一、单位机构人员编制基本情况 1、单位名称人员编制：）） 为文件精神，文件单位基本情况 现有人员情况：实有人数人，其中：管理人员人，专业技术人员总数人正高级人，聘任1人；副高级人，聘任人；中级人，聘任人；初级人，聘任人），工勤技能人员人（高级工人，中级工人，初级工人，普通工1人）。 、组织机构 岗位设置工作组织机构设置 为保证单位事业岗位设置工作顺利进行，成立本单位岗位设置工作领导小组，成员如下： 组?长：院长成?员：? 刘琼 （2）领导小组工作职责 1、传达有关岗位设置管理工作的文件精神，宣传岗位设置工作政策，广泛听取单位职工的意见和建议。 2、制定本单位岗位设置方案及具体实施方案。 3、协调和处理岗位设置工作中出现的各种情况和存在的问题。 拟设置岗位情况总数个，占单位岗位总量的%。其中。 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler g