变量泵图解分析.ppt

TERTEW 手动控制 压力补偿控制 压力与流量补偿 HYDROKRAFT PRODUCTION FACILITY HYDROKRAFT PRODUCTION FACILITY HYDROKRAFT PRODUCTION FACILITY HYDROKRAFT PRODUCTION FACILITY HYDROKRAFT PRODUCTION FACILITY HYDROKRAFT PRODUCTION FACILITY HYDROKRAFT PUMPS AND MOTORS Copyright ? Eaton Limited 2003 Steve Skinner, Eaton Hydraulics, Havant, UK M Q ~8 sec ~50 sec M ES 电气调节 Q ~8 sec ~70 sec PVX PVW Remote positioning of the swash plate can be achieved using an electric motor and gearbox into which can be incorporated switches or a potentiometer to provide pre-set positions. Typical response times would be between 8 and 70 sec (min to max flow or vice versa) depending upon the gearbox ratio selected. M N N t (min) 应用举例 – 搅拌机 A typical application for the ‘ES’ control would be a mixer drive where speed changes are relatively slow and infrequent. With a suitable controller this type of control can also be used for low-dynamic closed loop speed control applications. Q U tMIN ~ 300 mS - 1000 mS U SP tMIN 300 mS ? 电子排量控制 - PROPNL Q The ‘SP’ control provides electronic displacement control of the pump or motor where the swash plate angle is positioned by a closed loop position control arrangement utilizing a proportional valve, amplifier electronic feedback of swash plate position. The control requires a pilot pressure supply either from an in-built pilot pump or separate supply. Q U tMIN ~ 300 mS - 1000 mS U SP tMIN 300 mS ? 电子排量控制 - PROPNL Q Typical response times (zero to maximum flow or vice versa) are in the range 300 to 1000 milliseconds although faster responses may be achievable (consult Hydrokraft Engineering Dept.) The ‘SP’ control is the preferred option where electronic control of displacement is required and provides the best performance in terms of hysteresis, response time etc. U SM 电子排量控制 - SERVO Q PVW / TVW Only (Non-preferred option) Q U tMIN ~ 300 mS - 1000 mS tMIN 300 mS ? A second option for providing electronic displacement control is available on the ‘W’ type units which