LED模块性能IEC规范之统计技术研究.pdfVIP

LED 模块性能的 IEC 规范之统计技术研究 陈超中 李为军 杨樾 施晓红 [上海市质量监督检验技术研究院 国家灯具质量监督检验中心 国家电光源质量监督检验中 心（上海）上海时代之光照明电器检测有限公司 全国照明电器标准化技术委员会灯具分技 术委员会 中国照明学会灯具专业委员会 上海 200233] 摘 要：本文以数理统计及概率论的基础理论为基础，分析了正在起草中的IEC PAS 《普通照明用LED 模块性能要求》中模块功率和光通量两个参数所使用的 用样本推断总体的数理统计原理，从而揭示出该 IEC PAS 利用样本均值为总体均 值的无偏估计,实现对 LED 模块功率和光通量总体均值的考核的同时，给出了相 应均值所在的置信区间与置信水平。 关键词：LED ；LED 模块；样本；总体；数理统计；模块功率；光通量 Study on Statistical Analysis of LED module performance in IEC specifications Chen Chaozhong, Li Weijun, Yangyue, Shi Xiaohong Shanghai Institute of Quality Inspection and Technical Research (SQI), China National Luminaire Supervision Testing Center (CLTC), National Center of Supervision Inspection on Electric Light Source Quality (Shanghai), Shanghai Alpha Lighting Equipment Testing Ltd., Subcommittee 2 on Luminaire of National Technical Committee 224 on lighting of Standardization Administration of China, Luminaries Specialty Committee of China Illuminating Engineering Society, Shanghai, 200233 Abstract: This paper focuses on the drafting IEC Publicly Available Specification (PAS) light emitting diodes (LED) modules for general lighting performance requirements. Based on the principles of mathematical statistics and probability theory, analysis of the population characteristics by inference from module power and luminous flux samplings revealed that unbiased estimators by using parameter sample mean as the means in this IEC PAS. Thereby, giving corresponding confidence interval and confidence level while realizing the assessment of module power and luminous flux. Keywords: LED; LED module; Sampling；Population; Mathematical statistics; Module power; Luminous flux IEC 正在制订 PAS 《普通照明用LED 模块的性能要求》，其中的模块功率与 光通量两个试验项目的样本大小均为 20 只，除对单个 LED 模块相应质量进行判 断以外，还用相应样本的平均值进行判断，并且给出