KeysightN7020A电源完整性测量探头.PDFVIP

Keysight N7020A Keysight N7020A Power Rail Probe for Power Integrity 电源完整性测量探头 Measurements 适合的工具契合任务需求 The Right Tool for the Right Job Data Sheet 技术资料 Would you like to minimize oscilloscope and probe noise when measuring DC power rails? Do you need more offset than is available in your oscilloscope so you can zoom-in to view and analyze small signals on top of DC power supplies? Would you like to have 2 | 是德科技 | N7020A 电源完整性测量探头 – 技术资料 input impedance greater than 50 Ω at DC so your oscilloscope doesn’t load your DC power rails? Do you need more bandwidth so you can track down transients on your DC power supplies that can adversely affect your clock and data? If so, the Keysight 专用电源完整性测量探头需求 Technologies, Inc. N7020A power rail probe is the right tool for the job. 测量直流电源时，您是否希望最大限度地降低示波器和探头噪声？您是否需要增加示波 Developed specifically to help engineers with precise DC power rail testing, the N7020A 器现有偏置以放大显示并分析直流电源的小信号？您是否需要 50 Ω以上的直流输入阻 power rail probe was designed to minimize noise and maximize the offset range of the 抗，以避免示波器增加直流电源轨负载？是否需要更宽的带宽以跟踪直流电源瞬态，避 measurement system while providing high bandwidth and low target loading. 免对时钟和数据造成不利影响？如果您有以上需求，Keysight N7020A 电源完整性探头 是您的理想选择。 The Challenge N7020A 电源完整性探头旨在满足工程师的精确直流电源轨测试需求，能够最大限度地 The increased functionality, higher density, and higher frequency operation of many modern electronic products has driven the need for lower supply voltages. It is common 降低测量系统噪声并扩展偏置范围，同时提供宽带宽和较低的目标负载。 in many designs today to have 3.3, 1.8, 1.5 and even 1.1V DC supplies—each of them having tighter tolerances than in previous product generations. 挑战 Engineers need to zoom-in on power rails to look for transients, measure ripple, and 当代电子产品的功能日益丰富，密度持续增加，而且工作频率不断提升，带动低压电源 analyze coupling. An oscilloscope often does not have enough offse